Thermal · Chandkheda · 2026-04-01
HP Omen 15 — Overheating & Thermal Service in Chandkheda, Ahmedabad
Quick answer
HP Omen 15 (gaming laptop (10th-gen i7, RTX 2060)) arrived with: Throttling to 0.8 GHz within five minutes, fan screaming, chassis too hot to hold. Root cause: Pump-out of dried thermal compound plus a dust-clogged fin stack; the fan bearing had also developed axial play. Repaired at HOPE Systems Ahmedabad for ₹2,699 in 3 hours, with a 90-day warranty. Success rate for this repair category: 97%.
Device & specification
gaming laptop (10th-gen i7, RTX 2060)
Reported symptom
Throttling to 0.8 GHz within five minutes, fan screaming, chassis too hot to hold.
“It sounds like a jet and games stutter after five minutes.”
Diagnostic procedure
- Baseline thermal log during a 20-minute stress run
- FLIR imaging of heatsink and VRM area
- Fan RPM and bearing-noise inspection
Root cause analysis
Pump-out of dried thermal compound plus a dust-clogged fin stack; the fan bearing had also developed axial play.
Step-by-step repair process
- Full teardown and heat-pipe removal
- Fin stack cleaned with compressed air and brush
- Fan assembly replaced
- Liquid-metal-free premium paste applied, thermal pads replaced on VRM/VRAM
- Stress test re-run with logging
Parts replaced & costs
| Part | Cost (INR) |
|---|---|
| Cooling fan assembly | ₹1,400 |
| Premium thermal compound and pads | ₹600 |
| Total billed (parts + labour) | ₹2,699 |
Quality-control testing
- Full power-cycle test (10 cycles)
- 2-hour stress/burn-in with thermal logging
- Port, Wi-Fi, audio, camera and battery-charge verification
- Final cosmetic clean and screw-torque audit
Customer review
★★★★★
“Overheating & Thermal Service on my HP Omen 15 was handled honestly at HOPE Systems — clear quote before work, free pickup from Chandkheda, and it came back working perfectly within the promised 3 hours.”
— Dhruv Modi, Chandkheda
Similar fault on your machine? See the service page or book a free diagnosis.